Getting that Wall Ring Up
Alright, so I decided I needed a solid anchor point on my garage wall. You know, something tough to hang heavy stuff from, maybe chains, straps, that kind of thing. My setup was getting messy, things just lying around. I figured a strong wall ring would sort things out a bit.

First step was getting the actual ring. Didn’t want some flimsy thing. Went down to the hardware store, spent a good while looking at options. Found a decent, thick steel ring with a solid mounting plate. Looked like it could hold some serious weight. Grabbed some heavy-duty lag bolts too – the kind that look like they could hold a truck.
Back home, the next job was figuring out where to put this thing. This was important. You can’t just screw something heavy into drywall; it’ll rip right out. Had to find a wall stud. Pulled out my trusty stud finder, scanned the wall a few times. Found a good solid spot, marked it up with a pencil.
Then came the drilling. Lined up the mounting plate, marked the holes. Grabbed my drill. Started with a smaller pilot hole, just to make it easier. Then switched to a bigger bit for the lag bolts. The drilling went okay, bit dusty, but no major dramas. Made sure the holes were deep enough for the bolts.
Next up, actually mounting the ring plate. Lined it up with the holes, got the lag bolts started by hand. Then I got the socket wrench out. Cranking those bolts in took some effort, especially the last few turns. You really gotta tighten them down good and snug against the wall stud. Don’t want any wiggle.
- Found a solid stud. Crucial step.
- Drilled pilot holes first.
- Used big lag bolts.
- Tightened everything down real good.
Once it was up, I gave it a good pull. Like, really put my weight into it. Didn’t budge. Felt solid as a rock. Threw a heavy chain over it just to see. Perfect. Exactly what I needed.

So yeah, the wall ring is installed. Took a bit of effort, mostly finding the stud and then wrenching those bolts in, but it’s done. Now I’ve got a proper place to hang the heavy gear instead of tripping over it. Feels much better, more organized. Simple job, but satisfying when it’s done right.